Posted: Sun Mar 09, 2008 12:00 am Post subject: need help with vl1002
i need help. this is my first tube amp so im not sure what the problem could be. i havent owned in very long mabe 2 months. today it worked fine played it for an hour turned it off and came back in about 2 hours turned it on and nothing happened. the disply lights are off and the tubes are not glowing but the the channel lights are on so its getting power.
thanks for any help that i recieve
Posted: Sun Mar 09, 2008 6:03 am Post subject: vl1002
It could be the recurring "molex" connector issue. It's a multi-pin plastic plug that connects the different circuit boards, such as the main board to the power tube board. The fillament (heater) supply is in the 9-pin plug, which has been found to not hold up to the amount of current going through it, and often starts to burn up. That supply also runs the logo backlight. The connector could have simply come loose, but if you open the chassis, you may find one of them to be a little blackened around the end of the plug. A quick fix may be to wiggle the plug to regain connection (powered down and unplugged of course), but ultimately, the best solution is to take the plugs out and hard wire the boards together, as shown in Lees VL service video.
This actually just happened to me a few days ago!
I was setting up for a show and my beloved amp was no go, luckily i had a friend there that let me borrow his 1954(?) Gibson Explorer amp, it worked well, but it still wasn't my Ampeg!
check lees' site he sell a repair dvd for that model. i had mine gone over by lee, he worked a miracle and it freakin' rocks just as hard as these "boutique" amps that guys pays 3k to 4k for. if you can afford it and if he's got time thats the best method.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum